Engine overhaul introduces the student to the concepts and skills necessary to diagnose and overhaul automotive engines. Areas covered in this class include introduction to specialty tools and their correct use, complete engine disassembly, inspection and measurement of internal components including heads, valve resurfacing, and proper fitting and reassembly of entire "long block". Class time is divided between classroom and lab.

Manual Drive Train & Axles I is a basic introduction to the manual transmission found in the automotive industry. The course includes an introduction to the theory behind manual transmissions, identification of the different types of transmission and their components, and an introduction to the specialized tools used in servicing transmissions, synchromesh transmissions, gear ratios found in different transmissions, an introduction to manual clutches and transfer cases, and drive shaft technology including CV joint and bearing replacement. Students will receive instruction that will assist them in taking the Automotive Service Excellence (ASE) exams after successfully completing the 1st and 2nd levels of the automotive technology program.

In this course students will: document fundamental suspension systems concern; perform fundamental diagnostics of steering systems; perform fundamental repairs of suspension systems.

Steering & Suspension II is the advanced application of knowledge and hands-on skills learned in AUT140 (Steering & Suspension I). The course includes the use of alignment geometry and computerized alignment equipment to diagnose and repair steering suspension problems and to verify that a vehicle's suspension and steering components are within manufacturer's specifications. It also includes removing and replacing steering and suspension components according to manufacturer's specifications, inspecting, servicing, and repairing wheel and tire assemblies for optimum performance. Prerequisite: AUT140

This course is a thorough and detailed study of brake system theory and functional operation and principles of hydraulic systems as it applies to braking system operation. Practical applications of all phases of brake work including complete system service of disc and drum brake systems, parking brake systems, power assist devices and machining of brake disc and drum.

Brakes II apply the knowledge and hands-on skills acquired in AUT150 (Brakes I). It includes testing troubleshooting, diagnosing, disassembling, and replacing both automotive drum and disc brake systems using manufacturer's specifications, four-wheel and rear wheel anti-lock braking system components, operations, and repairs will also be covered. Prerequisite: AUT150

In this course students will complete service work orders; describe the relationship between voltage, ohms and amperage; perform basic electrical circuit repairs; identify electrical system faults; identify basic wiring diagram symbols, components, and legend information; perform basic electrical circuit measurements using a DVOM; describe basic circuit characteristics of series, parallel and series parallel circuits through a variety of classroom and shop learning assessment activities.

Electrical & Electronic Systems I builds on the skills developed in Electrical I. This course emphasizes battery design, starter systems, and the charging system and its components. In addition to these systems, hybrid technology will be explored. Class time is divided between the classroom and lab experiences. Classroom is primarily lecture, discussion, and group or individual learning activities that emphasize troubleshooting and problem-solving skill development. Prerequisites: AUT 161 Electrical I

Engine Mechanical Diagnosis involves diagnostic theory, process, and testing as well as practicing major component replacement. Students will split their time between the classroom and lab.

Heating & Air Conditioning I is an introductory course that is designed to provide the student with a solid foundation in automotive heating and air conditioning. Class time is divided between the classroom and lab experiences. Classroom time is spent primarily on lecture, discussion, and group or individual learning activities that provide a foundation to encourage troubleshooting skill development. Prerequisites: AUT 161 Electrical I

In this learning plan students will complete work order and check history; identify engine mechanical integrity; explore the fundamentals of fuel system theory; identify fuel system concerns; explore the fundamentals of ignition theory; identify ignition system concerns; identify induction system concerns; identify exhaust system concerns; identify engine mechanical integrity through a variety of learning and assessment activities. Prerequisites: AUT 161 Electrical I

Engine Performance II builds on the knowledge and skills developed in Engine Performance I. The course continues the study of theory and of power train diagnostics. Students will learn the rudiment of computerized engine controls, ignition systems, fuel, air induction, and exhaust and emission control systems. The course provides extensive hands-on training on the use of the latest diagnostic equipment and tools. Prerequisites: AUT 181 Engine Performance I

Automatic Transmission/Transaxle I is a basic introduction to automatic transmissions/transaxle systems. The course includes an introduction to hydraulic principles, an introduction to the different types of automatic transmission fluids, automotive measurement, and the identification to the parts of the automatic transmission including planetary gear sets, brake bands, bearings, pumps, boost systems, and valve bodies. It also contains some basic services performed on an automatic transmission including oil filter replacement, air testing of clutch packs, removing and refitting a transaxle and/or transmission. Students will receive instruction that will assist them in taking the Automotive Service Excellence (ASE) Exams after successfully completing the requirements of the 1st and 2nd levels of the automotive technology program.

Automatic Transmission & Transaxles II is the advanced application of knowledge and hands-on skills acquired in Automatic Trans & Transaxles I. The course includes testing, troubleshooting and diagnosing, disassembly, inspection, and assembly of automatic transmissions and transaxles according to manufacturer's specifications. Electronically controlled automatic transmission components and operation are covered along with diagnosing and repair. Students will receive instruction that will assist them in taking the Automotive Service Excellence (ASE) exams after successfully completing the requirements of the 1st and 2nd levels of the automotive technology program.

Manual Drive Train and Axles II contains the advanced application of knowledge and hands on skills acquired in Manual Drive Train & Axles I. Emphasis will be on testing, troubleshooting and diagnosing, disassembling, inspecting and assembling transmissions and trans axles according to manufacturer's specifications. Students will receive instruction that will assist them in taking the automotive excellence (ASE) exams after successfully completing the requirements of the 1st and 2nd levels of the automotive technology program.

Electricity/Electronic Systems II is an advanced level course and builds on the knowledge, skills and abilities mastered in Electricity/Electronic Systems I. This class involves the theory and application of automotive electronic circuits and accessories. It includes the construction and servicing of lighting systems, gauges, warning devices, windshield wipers, and solid state devices. The course provides the knowledge to prepare for the Automotive Service Excellence (ASE) Exams. The course is aligned closely with the NATEF/ASE task list for A6 Electrical/Electronic Systems. Prerequisites: AUT 161 Electrical I; AUT 162 Electricity/Electronics I

Heating and Air Conditioning II is an advanced level course and builds on the knowledge, skills and abilities mastered in AUT170 Heating & Air Conditioning I. Climate control systems are explained in-depth including theory of refrigeration, servicing procedures, and diagnosis techniques. Compressor service and distribution systems are studied. Laboratory experience is given in testing and servicing a variety of systems and problems. The course provides the knowledge to prepare for the Automotive Service Excellence (ASE) exams. The course is aligned closely with the NATEF/ASE task list for A7 Heating & Air Conditioning. Prerequisites: AUT 170 Heating - Air Conditioning I

Engine Performance III is an advanced level course and builds on the knowledge, skills, and abilities mastered in Engine Performance I (AUT181) and Engine Performance II (AUT182). This class involves theory and application of automotive engine diagnostics including computerized engine controls, ignition systems, fuel, air induction and exhaust systems, emission control systems, and exhaust gas treatments. The course provides extensive hands-on training on the use of the latest diagnostic equipment and tools. The class provides the knowledge to prepare for the Automotive Service Excellence (ASE) exams. The course is closely aligned with the NATEF/ASE task list for A8 Engine Performance. Prerequisites: AUT 182 Engine Performance II